|
|
|
|
| |
|
 |
|
| Type: Eavcuated Tubular Solar Water Heater -
Thermosiphon |
| Features: |
- Use evacuated glass tubes as the solar heat collector to absorb sunlight and generate heat
- The solar collector is equipped with a stainless steel water storage tank, well-insulated with high-density PU foams of 45-55mm in thickness
- Daily average efficiency is more than 50%
- The vacuum tubes made of Borosilicate glass are inner-side coated with selective Al-N/Al cermets able to generate heat all year round even in cold climate place
- Al-plate reflectors are optional to improve heating efficiency
- Auxiliary electric heater and microcomputer controller are available
|
| Specifications: |
- Evacuated tube: Ø 47*1500 /1800mm, Ø58*1500/1800mm
- Tube number: 16 C 26 pcs
- Capacity: 130 -300L
- Collector area: 2.10 - 3.18m2
- Installation area: max. 2185*1630mm
- Storage tank: Ø480 / Ø440 mm stainless steel
- Inner tank: Ø380 / Ø330 mm SUS304 stainless steel
- Insulation: 55 / 50 mm Polyurethane foam
- Work pressure: 0 Mpa
- Efficiency: > 55%
|
|
 |
|
| Type: Active Solar Water Heating System |
| Features: |
- Use evacuated glass tubes as the solar heat collector to absorb sunlight and generate heat
- Circulation pump used to circulate household water (heat pipe) or heat-transfer fluid (U-pipe) through the collectors and into the home
- A separate storage tank is positioned below the solar collectors
inside the building
- A gas water heater is set as back-up heat source for cloudy days and times of increased demand
- The vacuum tubes made of Borosilicate glass are inner-side coated with selective Al-N/Al cermets able to generate heat
- Al-plate reflectors are optional to improve heating efficiency
- A controller senses the temperature differences between storage tank and solar collector, and turn on the circulation pump
|
| Specifications: |
- Capacity: 240 - 280L
- Collector: 2/3*TR-12/1.8 or TU-12/1.8
- Collector area: 2/3*1.73m2
- Work pressure: 0.6Mpa
- Efficiency: >55%
|
|
 |
|
| Type: Flat-plate Solar Water Heater |
| Features: |
- Use high efficient sputtered selective coating as sunlight absorber on copper plated aluminum substrate
- High transparent but low reflective temper glass cover can resist possible impact and increase light absorbance
- Polyurethane insulation for both the solar collectors and storage tanks guarantee best heat-preservation
- Unique fully integrated Aluminum back cover to increase the overall strength of the heat collector, and to optimize water-proofing and heat-preserving ability
- Use food grade stainless steel for the inner storage tank with best rusting-resistance
- Non-pressure or pressure type
|
| |
Specifications: |
| |
- Collector area: 2 - 8m2
- Capacity: 150 - 600L
- Water temperature: 45-75
- Efficiency: >55
- Absorbance: 92
- Electric heating booster: 1.5kw
- Family members: 2-9
|
|
 |
|
| Type: Flat-plate Solar Water Heating System |
| Features: |
- Use high efficient sputtered selective coating as sunlight absorber on copper plated aluminum substrate
- High transparent but low reflective temper glass cover can resist possible impact and increase light absorbance
- Polyurethane insulation for both the solar collectors and storage tanks guarantee best heat-preservation
- Unique fully integrated Aluminum back cover to increase the overall strength of the heat collector, and to optimize water-proofing and heat-preserving ability
- Use food grade stainless steel for the inner storage tank with best rusting-resistance
- Non-pressure or pressure type
|
| |
Specifications: |
| |
- Dimension: 2000 * 1000 * 85mm
- Solar absorbance: 95%
- Thermal emissivity: 4%
- Width: 900mm
- Thickness: 4mm
- Water pipe: 7 * copper tubes
- Diameter: 10mm
- Manifold tubes: 25mm
|
| |
back to top >> |
|
|
|
|
Solar Air Condtioner 
SolarWater Heater 
